Tuesday, January 31, 2017

The data collected from the two studies prove exactly this point.

From: Quentin Boone <qjboone00069@gmail.com>
Subject: Creation of Energy - unlimited energy for a closed system

       If I can bend your ear for about ten minutes I will prove to you that energy can be created.  Centripetal acceleration is the phenomenon behind the theory.  There are two examples from which the physics community regularly draws upon in distinguishing centripetal force, push centripetal force and pull centripetal force. These are a carnival's wall of death - motorcycles traveling in a cylinder (push), and the ball on a string (pull).   Both are examples where the body in motion's radius from center is constant.  However, there is still one more example out there that is entirely unique.  It is a coin traveling a centripetal path in a funnel.  In this example, there is push centripetal force where the body in motion (coin) is constantly getting closer to center, or that its radius is constantly decreasing as the coin travels its centripetal path. 

        I have forwarded an attachment which is a dissertation on how energy can be created and used as an unlimited energy supply for a closed system.  I am also forwarding an attachment containing two studies that prove the theory.  I am hoping you will take a small amount of time to read the same, it doesn't take long but you must read it in its entirety.  I greatly appreciate your valuable time and look forward to hearing from you.  

Regards,

Quentin J. Boone



Creation of Energy Theory

(Unlimited Energy for a Closed System)

1. Observing Coin Energy in the Funnel: Before we begin let’s take a brief moment to gain

perspective on coin funnel energy. Observing the following video allows us to see centripetal

force’s effect on coin energy as it descends in the funnel. We must view the following video

only during seconds 32 – 51. This is exactly the time frame where the funnel’s bottom diameter

is one-quarter size of its top diameter and when the coin accelerates from one to four revolutions

per second; viewable (go to full screen) at https://www.youtube.com/watch?v=h6itJ1GkTqI.

2. Funnel Created in Right Cone: In all right cones the top diameter is decreased by half at

half the cone’s depth, highlighted green. It is decreased by half again at three-quarters of the

cone’s depth, highlighted red. Create a funnel within the three-quarter region so that its bottom

diameter is one-quarter size of its top diameter, highlighted blue. The vertical dotted lines

corresponding to the right cone’s diameters show us where the funnel’s top diameter decreases

by half and half again, illustrated below.

Funnel

Top Diameter

Half Diameter

Half Diameter





1 st qtr.



2 nd qtr.



3 rd qtr.

4 th qtr.

2

Patent Pending 1/30/17

3. Thesis Statement: Potential gravitational energy and kinetic rotational energy are the

energies involved in this theory. Centripetal force and of course gravity are acting on the coin.

Coin weight, friction and normal reaction are also factors involved to help us define what is

occurring during coin descent.

The coin travels in a circular motion as centripetal force and gravity draw it toward

center. As the coin descends its velocity increases. Note the pitch of the coin changes from

slight to completely horizontal as it descends from the funnel’s outer diameter to the spout. Due

to the coin’s high velocity and friction as it descends the spout, gravity’s effect is slowed and

energy can be created simply by decreasing funnel diameter. Let me be clearer. As the coin

descends to a horizontal posture nearing the spout, it continues to accelerate in (or nearly in) a

horizontal plane and we can increase its energy by simply decreasing funnel diameter.

It is the diameters of the funnel that determine when energy will be given to the coin.

When the funnel’s diameters decrease by half the energy of the coin doubles. From top to

bottom of the funnel the coin’s energy quadruples.

Our focus is on the three-quarter region. I would posit not only have we created energy

by quadrupling the coin’s energy in the funnel formed in only three-quarters of the right cone,

but we can create even more energy in this same region by simply decreasing the funnel’s

bottom diameter to less than one-quarter of its top diameter, illustrated below.



1 st qtr.



2 nd qtr.



3 rd qtr.

4 th qtr.

3

Patent Pending 1/30/17

I will prove to you in the remaining portions of this dissertation that a centripetal path

within a funnel formed in three-quarters of the right cone creates energy.

4. Coin Energy and Funnel Diameter: It is the diameters of the funnel that determine when

energy will be given to the coin descending a centripetal path within it. As the coin descends

through the funnel’s halving regions its revolutions double, ultimately quadrupling by the time it

reaches the bottom. I have found two videos displaying coin funnel footage on a time line. The

data collected from the two studies prove exactly this point.

First Video: Under the title “Coin Tornado,” the following data was recorded on the first

coin to enter the funnel. The data represents coin velocity and corresponding diameter at

specified locations in the funnel.

Funnel Position Revolutions/Second Diameter (cm)

Top Diameter 1.12 10.72

Half Diameter 2.01 05.05

Half Diameter 3.96 02.58

Comment: This clearly shows the coin’s energy doubling and quadrupling when the funnel’s

diameters decrease by half. Please see Observation of Raw Data attachment for full study.

Second Video: Under the title “Spiral Wishing Well,” the following data was recorded

on the last coin to enter the funnel. The data represents coin velocity and corresponding

diameter at specified locations in the funnel.

Funnel Position Revolutions/Second Diameter (cm)

Top Diameter 1.10 12.20 (see Note)

Half Diameter 2.03 08.03

Half Diameter 3.93 03.95

4

Patent Pending 1/30/17

Comment: This clearly shows coin velocity doubling and quadrupling when the funnel’s

diameters decrease by half. Please see Observation of Raw Data attachment for full study. Note:

Camera zoom – reason why top diameter not closer to 16.00 cm.

There can be no other explanation as to what is occurring in these observations. When

the diameters of the funnel are decreased by half the coin’s energy is doubled. But, why does a

coin’s energy quadruple in a funnel created in only three-quarters of the right cone? And, could

there be even more energy created within this three-quarter region? Let’s continue by discussing

coin friction, slowing gravity’s effect and creating energy in the horizontal plane.

5. Energy Created in the Horizontal Plane: Coin weight, friction and normal reaction acting

in concert help us define the coin’s descent, where it ultimately is able to accelerate in (or nearly

in) a horizontal plane.

When the coin descends as it relates to the vertical plane, energy is being created with its

increasing revolutions as it relates to the horizontal plane. The further the coin descends velocity

increases and there is less and less space in the path of its spiral. As the coin descends its

revolutions are getting closer together. Also, the coin pitches nearer to a horizontal posture the

closer it approaches the funnel spout. It then pitches all the way horizontal and travels a very

tight spiral, slowly down it. Here the coin’s revolutions exist in (or nearly in) the horizontal

plane. Due to the coin’s high velocity and friction, gravity’s effect is slowed so energy can be

created simply by decreasing funnel diameter.

This is why we see a quadrupling of the coin’s energy in only three-quarters of the right

cone. Energy has been created. To further illustrate this point, we could increase the coin’s

energy within the three-quarter region by simply bringing the bottom diameter of the funnel to

less than one quarter of its top diameter, illustrated below.

5

Patent Pending 1/30/17


Perpetual Motion Device

(Closed System for Unlimited Energy Source)

1. Perpetual Motion Device: The best example for illustrating half the dynamic of the device

is a coin descending in a funnel. The coin’s path represents the descending path of the device.

The other half dynamic is created by adding a theoretical one hundred eighty degree ascending

path connecting the bottom to the top, illustrated below.



2. Track: Construct a track like the coin’s centripetal path in the funnel and add a one hundred

eighty degree ascending track connecting the bottom to the top. The vehicle riding the track is

one that lies throughout its entirety forming a loop. Because we are working with three-quarters

of the right cone structure, three complete centripetal spirals will be used in the track’s

formation. This ensures an optimum grade of descent. If we measure the descent to ascent

portions of track we discover its ratio is three to one (3:1), illustrated below. This is important

because the weight of three parts descending loop will constantly pull its one part ascending until

equilibrium is established.

7

Patent Pending 1/30/17







3. Description of Vehicle Loop: It is a continuous vehicle that runs along the entire track;

down the two and one-half descending spirals, up the one-half ascending spiral and is connected

at both ends forming the loop. It is a smooth metal snake-like loop that is fluid and capable of

flexing through the decreasing diameters of the track’s spirals.



Vehicle Loop

Track

(Cross Section)

4. Centripetal Acceleration System: Now that we have a clear understanding of the device’s

design we can discuss the dynamic of the system. It is the weight of descending loop that causes

8

Patent Pending 1/30/17

the vehicle to begin movement. The three parts descending continuously pull the one part

ascending. As it accelerates the resistance between ascending loop and descending loop will

gradually reduce to nil as it proceeds to equilibrium. Equilibrium will be established when the

velocities from top to bottom of the device are one, two and four revolutions per second,

respectively. Once equilibrium is established the pull resistance atop the device will transfer to

driving force at the bottom. It will then proceed to maximum velocity.

5. Conclusion: There are multiple factors in the design of the device simultaneously

functioning with one another that make the whole thing work. It is the weight of the vehicle loop

and energy created in the diameters of the device’s centripetal track that keep it in motion

perpetually. Upon releasing a brake, the loop will begin to accelerate due to the three to one

(3:1) descent to ascent ratio. Acceleration will continue until the device reaches equilibrium.

Equilibrium will be established when each portion of loop is traveling one, two and four

revolutions per second on its respective region of track. Upon achieving equilibrium, pull

resistance atop the device transfers to driving force at the bottom. The loop will then proceed to

maximum velocity and run like a gravity motor. Food for thought, generators could be built into

the track so the world could have free electricity.

No comments:

Post a Comment